|
|
| Line 1: |
Line 1: |
| − | ZFS Installation | + | [[ZFS Installation]] |
| − | | + | [[FS administration]] |
| − | more detailed information can be found in this link ---> [http://gridpp-storage.blogspot.com/2016/04/setting-up-of-zfs-based-storage-server.html here]
| + | |
| − | | + | |
| − | The omreport/omconfig commands are special to Dell machines but there should be similar commands available for other installations.
| + | |
| − | | + | |
| − | | + | |
| − | | + | |
| − | 1) find out which disks are there to be used
| + | |
| − | | + | |
| − | omreport storage pdisk controller=0|grep -E "^ID|Capacity"
| + | |
| − | | + | |
| − | | + | |
| − | 2) for the disks id found above create single raid0 '''IF you have a raid controller only and no HBA''':
| + | |
| − | | + | |
| − | for i in $(seq 0 11);
| + | |
| − | do
| + | |
| − | omconfig storage controller controller=NUMBER action=createvdisk raid=r0 size=max pdisk=0:0:$i;
| + | |
| − | done
| + | |
| − | | + | |
| − | '''The pdisk id needs to be adapted!'''
| + | |
| − | | + | |
| − | | + | |
| − | 3) look if all disks are available
| + | |
| − | | + | |
| − | lsblk |grep disk
| + | |
| − | | + | |
| − | | + | |
| − | 4) find the correct disks to be put in the storage zpool ('''example for 2TB disks''')
| + | |
| − | | + | |
| − | lsblk |grep 1.8T
| + | |
| − | | + | |
| − | | + | |
| − | 5) with the names returned by lsblk create a raidz2 or raidz3 depending on your needs
| + | |
| − | | + | |
| − | '''Be sure not to forget to configure the spare!'''
| + | |
| − | | + | |
| − | zpool create -f POOLNAME raidz3 sdb sdc sdd sde sdf sdg sdh sdi sdj sdk sdl sdm sdab sdad sdae sdag sdah sdaj spare sdak
| + | |
| − | | + | |
| − | | + | |
| − | | + | |
| − | 6) enable different features of zpool and zfs and configure it correctly
| + | |
| − | | + | |
| − | zfs set compression=lz4 POOLNAME;
| + | |
| − | zpool set autoreplace=on POOLNAME;
| + | |
| − | zpool set autoexpand=on POOLNAME;
| + | |
| − | zfs set relatime=on POOLNAME;
| + | |
| − | zfs set xattr=sa POOLNAME;
| + | |
| − | zpool export POOLNAME;
| + | |
| − | zpool import -d /dev/disk/by-id POOLNAME;
| + | |
| − | | + | |
| − | 7) for usage with DPM:
| + | |
| − | | + | |
| − | zfs create POOLNAME/gridstorage01
| + | |
| − | chown -R dpmmgr:dpmmgr /POOLNAME
| + | |
