Difference between revisions of "Incident Response Handbook"
Jeremy coles (Talk | contribs) |
(No difference)
|
Latest revision as of 09:25, 9 June 2006
Contents
LCG/EGEE Grid Security Incident Response Handbook
First DRAFT August 2005
- Part I Quick Start Guide
- Basic guide to minimum steps in grid incident handling.
- Part II Grid resources for incident handling
- Links to contact points and other information sources.
- Part III Grid Services security reference
- Service by Service quick reference to assist in incident severity classification
- Part IV Incident Playbook
- Incident scenarios described are not intended to be definitive, provide complete coverage of the area or to be used as checklists. They are provided as a basic framework which can discussed, developed and adapted or even discarded as appropriate for particular circumstances.
Read this first. The target audience for this handbook is grid site security personnel and grid service administrators. It is intended to cover BOTH LCG and EGEE projects and readers should consider all links, email addresses and other resources quoted as relevant for both projects. slight modifications have been made in tailoring for GridPP sites.
Areas for further UK amendment:
1) Include notification to the ROC & UKI security representative -> ROC ensures other sites notified
PART I: Quick Start Guide
or
"I think there's something bad happening, what should I do?"
Don't panic: of course you're far too experienced to do that anyway. The first thing for you to do is to report the incident. Reporting gives others the opportunity to protect themselves and allows them to help you if necessary. Note: Making accurate notes as you handle the incident will be invaluable both during the incident and for post-mortem analysis. Include the times of events in your notes. There is no one best way to act, but the basic process you should follow is summarized in the following sequence which is described in more detail in the sections below.
IMPORTANT: The following procedures are additional to your site's incident response. You must report incidents affecting your Grid resources to GridPP/EGEE/LCG as described below, but it is very important that you also report it to your site, following your site's procedures.
It helps if you have done your homework. Convince at least yourself that you know what to do. Work through the playbook below, pretending that it's happening to your site. Learn how to send signed email. If in doubt, talk to other admins.
Classify Decide on severity rating for your initial report.
Collate Gather necessary information for your initial report.
Report Send your report to the Grid Incident Response list.
Contain Prevent the incident spreading, protect your site and others.
Analysis & Response Appropriate actions to resolve the incident.
Post-Mortem Learn lessons and publish.
- Classify
- You should estimate the severity of the incident. Part III of this document is intended to help with this step.
- HIGH severity: it seems likely that a significant part of the grid could be made unusable or a significant number of grid identities have been, or may be at risk of compromise.
- MEDIUM severity: the event is local to a single grid service (such as a local root compromise) and is unlikely to propagate further.
- LOW severity: events affecting local resources and non-privileged accounts.
- Events NOT involving grid resources or identities should be reported using local site procedures. Do not use Grid reporting channels for these events.
- Collate
- Gather as much information as you can:
- Your Name:
- Grid Site (as registered in GOCDB):
- Contact Phone:
- Alternate phone:
- E-mail address:
- Grid Virtual Organization (VO):
- Certificate DN of any compromised identities:
- Time(s) of main events (including timezone):
- Systems involved or affected (IP address, FQDN):
- Report
- Write an email report. It should include:
- The Classification you made above in the mail Subject.
- Subject: HIGH Severity Grid Incident description of event
- All the information you gathered in the Collate stage above.
- A complete description of sequence of events as you understand them.
- A statement of what further action, if any, you will be taking and when you will be taking it.
A template report email is available <HERE>.
Send your email report to your local site incident handling point AND
project-lcg-security-csirts@cern.ch or project-egee-security-csirts@cern.ch (they are the same lists).
- Containment
- Depending on your understanding of the incident, take appropriate steps to contain the incident such as blocking authorization, halting the affected service, fire-walling, disconnecting the network or power-off to control damage. You may have already taken some steps on incident discovery but these must not significantly delay the reporting of the incident and you should be careful not to destroy evidence such as log-files which would lead to a better understanding of the incident. If your understanding of what is happening is poor, or you just don't know what to do, go immediately to the next steps.
- Analysis & Response
- IMPORTANT NOTE: The lists given above should ONLY BE USED FOR THE INITIAL REPORT. Subsequent responses and replies to the report MUST be posted too. After the initial incident report, the course that handling will take depends on many factors. For all HIGH severity and those MEDIUM severity events which have widespread effects, a small team should be assembled to coordinate incident handling. It is the responsibility of the reporting site security contacts and their ROC security contact to put this team in place.
- Post-mortem
- You should plan to obtain as full an understanding of what happened as possible and report this to:
project-lcg-security-contacts@cern.ch or project-egee-security-contacts@cern.ch (they are the same lists).
PART II Grid resources for incident handling
Gather the following information:
- Your local security contact/incident handling address: _______________________
- Your ROC security contact address: _____________________________________
The LCG/EGEE Security Contacts Lists.
- ROC Security contacts can be reached through the mailing list project-lcg-security-support@cern.ch and project-egee-security-support@cern.ch
- Site contact information is maintained in the GOCDB: https://goc.grid-support.ac.uk/gridsite/gocdb2/index.php
(check that your site information is accurate)
- A list of VO and other contact points is maintained here:
http://lcg.web.cern.ch/LCG/activities/security/contacts.html
- In your log files, you will usually see the Distinguished Name, or DN, of the user. If you suspect that the user's certificate is being used maliciously, or by someone who is not the user (maliciously or otherwise), contact the CA and ask for the user's certificate to be revoked. Naughty stuff violates all CAs' policies and is a circumstance for revocation (for classical CAs; but nearly all Grid CAs are classical). It helps if you provide as much evidence as possible (and always provide the DN), and sign the mail with your own certificate/key. A list of contact points for the LCG-approved CAs is maintained here:
http://lcg.web.cern.ch/LCG/users/registration/certificate.html
- Contacting a user: There is no procedure for finding a user's email address, given only the DN, that works with every CA. Indeed, most CAs do not publish the user's email address in the DN, or even in the certificate, to prevent addresses from being harvested by spammers. When they do put the email address in the certificate, the certificate is usually not public information.
- Your best bet is to reach the user via the appropriate VO manager (see contacts above).
- LHC Experiment users are registered in the PIE database: http://greybook.cern.ch/
- Contact the CA that issued the user's certificate.
LCG/EGEE approved Incident Response Policy is located at:
https://edms.cern.ch/document/428035/LAST_RELEASED (Since policy approval
can be a slow process, the current draft version - if applicable - should also be
consulted and is always here: https://edms.cern.ch/document/428035)
LCG/EGEE security policy documents are managed by the Joint Security Policy Group (JSPG) and are available for reference at http://proj-lcg- security.web.cern.ch/proj-lcg-security/
PART III Grid Services security reference
Based on the LCG2 Manual Installation Guide, the following node types are defined:
- Information System
- BDII
- Workload Management System
- Resource Broker
- Computing Element (Torque)
- Worker Node (Torque)
- Data Management System
- LFC Server (mysql)
- Classical Storage Element (SE classic)
- DPM Storage Element (SE dpm mysql)
- DPM Disk server (SE dpm disk)
- dCache Storage Element (SE dcache)
- VO, Security, Monitoring, Accounting
- VOMS
- User Interface
- Mon Box
- Proxy Server
- VOBOX for VO agents
PART IV Incident PlayBook
Case 1 Local unattributed activity from a single user Case 2 Compute Element relaying SPAM Case 3 Poisoning of information system
- Case 1 Local unattributed activity from a single user
- Incident Class: LOW
- Reported by user to GGUS based on accounting
- Actors: GGUS, User, Site
- Response:
- Report received by SSO from GGUS
- Investigation (Site <-> User)
- Analysis: Single identity compromised
- Route to compromise may change response
- Notification by SSO: User, VO(suspend), REPORT-L, GGUS
- Issues:
- How does SSO contact user, VO?
- 000's of distributed users -> notification overload
- Case 2 Compute Element relaying SPAM
- Incident Class: Medium
- Reported by external corporate security team
- Actors: Site, Ex-CSIRT
- Response:
- Report received by SSO from Ex-CSIRT
- Prelim. Investigation (SSO)
- Close service, remove from network
- Notification: REPORT-L, NREN CSIRT
- Analysis: CE rooted
- Notification: DISCUSS-L
- Issues
- Service-based threat analysis would be useful
- Case 3 Poisoning of information system
- Incident Class: HIGH
- Reported simultaneously from multiple locations, widespread job misdirection, failure, DOS
- Actors: Multiple Site, Experts, Developers/Deployment, Users, VOs, Management
- Response
- Reports might start as unassociated REPORT-L posts
- Team leader created, creates team Notify: REPORT-L
- Prelim Analysis: logs, network traffic
- Mitigation: network blocking, rebuild/lock IS Notify: DISCUSS-L
- Analysis: Broken protocol
- Patch Created, Packaged and Deployed Notify: Site admin
- Notification: DISCUSS-L
- Issues
- How to bootstrap team and its leader ROC/OSCT role
- Team communications Incident tracking tools
- Team communications to developers
- Deployment scheduling how long