Difference between revisions of "Imperial Dirac Maintenance"

Latest revision as of 10:35, 27 July 2023

Hardware

The Imperial dirac server consists of 4 machines:
dirac01 (configuration server, main dirac server)
dirac02 (second dirac server, for load balancing etc)
diracdb (hosts the databases)
diracweb (hosts the webserver)

Restarting dirac

To restart dirac:
as 'dirac' in /opt/dirac/:

killall -SIGHUP runsvdir
source bashrc
runsvdir /opt/dirac/startup &

Updating the dirac install

Note: dirac01 and dirac02 should always run the same version of the dirac software. Whatever you do it helps having a clean shell without the cursed bashrc having been invoked.

cd /opt/dirac/DIRAC
git status
git pull
find . -iname '*.pyo' -delete
[restart dirac]

and the GridPP module

cd /opt/dirac/GridPPDIRAC
git status
git pull
find . -iname '*.pyo' -delete
[restart dirac]

Note that for new dirac commands ('dirac-populate-component-db'), only the relevant python files are downloaded. To make the actual commands run:

dirac-deploy-scripts

New versions of the Externals and lcgBundles can be found here: [1], [2]

Update the pilot and diracos version

The pilot version is specified here: Operations -> GridPP -> Pilot

1. stop DIRAC: killall -SIGHUP runsvdir
2. remove diracos dir: rm -rf diracos
3. get the .sh file back (note the "latest", can be replace by version):
   curl -LO https://github.com/DIRACGrid/DIRACOS2/releases/latest/download/DIRACOS-Linux-$(uname -m).sh
4. and reinstall diracos: bash DIRACOS-Linux-$(uname -m).sh
5. rm DIRACOS-Linux-$(uname -m).sh
6. source bashrc (in a UI user: source diracos/diracosrc)
7. check that you are on the branch that you expect: cd DIRAC; git status; cd ..
8. If there are any un-merged changes, check out the original files first, as otherwise pip tries (and often fails) to be clever with the versions. Stash the changed files if necessary.
9. install from your local branch: pip install -e DIRAC[server] (for UI: pip install -e DIRAC)
10. install the rest of it: pip install -e GridPPDIRAC;  pip install -e WebAppDIRAC

python2: diracos: quietly copy off cvmfs from the lx machines across to the dirac node: /cvmfs/dirac.egi.eu/installSource/
python2: Which externals versions goes with which dirac version can be found here.

Check the logs

Looking at a specific SiteDirector:
tail -f startup/WorkloadManagement_SiteDirectorGridPP/log/current
Local dirac code:
tail -f /opt/dirac/startup/Configuration_AutoBdii2CSAgent/log/current

Adding a new VO

(example taken from the LZ VO, from memory, so probably incomplete)
on dirac01:
add VO to /etc/vomses and /etc/grid-security/vomsdir (as root)

on the webinterface (as dirac_admin):
Registry -> Groups: create lz_pilot and lz_user with all options. Add dirac pilot user to the pilot group.
Registry -> VO: add lz with all options and subfolder VOMSServers
Registry -> VOMS -> Mapping: add lz_user (note: we fill the pilot group by hand as we don't want the userandgroups script to fill it automatically)
Registry -> VOMS -> URLs: add lz folder with all options
Operations: add lz folder with all options
Systems -> WorkLoadManagement -> Production -> Agents: add folder SiteDirectorLz with all options

Make a SiteDirector (from a dirac ui):

source bashrc
dirac-proxy-init -g dirac_admin
dirac-admin-sysadmin-cli --host dirac01.grid.hep.ph.ic.ac.uk
[dirac01.grid.hep.ph.ic.ac.uk]> install agent WorkloadManagement SiteDirectorLsst -m SiteDirector
agent WorkloadManagement_SiteDirectorLsst is installed, runit status: Run 

Restart the UsersAndGroups Agent to populate the new groups.
Once the VO configuration is complete restart the BDII2CS agent.
In fact it's probably best to restart dirac and to be done with it... </br>

(Obsolete in v7r3) Upload a pilot proxy (on dirac01 as 'dirac'):

dirac-proxy-init -C /etc/grid-security/pilotcert.pem -K /etc/grid-security/pilotkey.pem -g lz_pilot -M -U -r

Make a top level directory on the file catalogue (from a dirac UI):

source bashrc 
dirac-proxy-init -g dirac_admin 
dirac-dms-filecatalog-cli 
mkdir [voname] 
chgrp voname_user [VO]
ls -l

If a new VO adds new sites, make sure to enable them (from a dirac ui): dirac-admin-allow-site LCG.MA-01-CNRST.ma "magrid1"

Registering a file in the dirac file catalogue

For those situations when a file is on an SE but not in the dirac file catalogue....

• File copied to SE without dirac involvement:
  

gfal-copy-vvv -b -D srmv2 somefile srm://gfe02.grid.hep.ph.ic.ac.uk:8443/srm/managerv2?SFN=/pnfs/hep.ph.ic.ac.uk/data/comet/comet.j-parc.jp/user/daniela.bauer/some.test.file
[...]

1. streams: 1
   

      941720 bytes   3628.98 KB/sec avg   3628.98 KB/sec inst 

• Register the file by hand
  

[on dirac ui]
dirac-dms-filecatalog-cli
FC:/> register file /comet.j-parc.jp/user/daniela.bauer/some.test.file srm://gfe02.grid.hep.ph.ic.ac.uk:8443/srm/managerv2?SFN=/pnfs/hep.ph.ic.ac.uk/data/comet.j-parc.jp/user/daniela.bauer/some.test.file 941720 UKI-LT2-IC-HEP-disk
File successfully added to the catalog
exit

• To check if it worked, on the dirac ui:
  

dirac-dms-get-file /comet.j-parc.jp/user/daniela.bauer/some.test.file

Enable/Ban a site

On a dirac ui:
source bashrc
dirac-proxy-init -g dirac_admin
dirac-admin-allow-site LCG.RAL-LCG2.uk "Test"
dirac-admin-ban-site LCG.RAL-LCG2.uk "Test"

Ban a CE, rather than a site

• Systems ->Configuration -> Agents -> AutoBdii2CSAgent -> BannedCEs
• Restart the AutoBdii2CSAgent

Install a new database/service etc

On a dirac UI of your choice...

source bashrc
dirac-proxy-init -g dirac_admin
dirac-admin-sysadmin-cli --host dirac01.grid.hep.ph.ic.ac.uk
[dirac01.grid.hep.ph.ic.ac.uk]> install db InstalledComponentsDB
MySQL root password: [go find password in config file]
Adding to CS Framework/InstalledComponentsDB
Database InstalledComponentsDB from DIRAC/FrameworkSystem installed successfully 

Edit the automatic entry under 'Host' in the config file (Systems -> Framework -> Production -> Databases) to contain the actual database machine.
Now install the service:

[dirac01.grid.hep.ph.ic.ac.uk]> install service Framework ComponentMonitoring

In order to install something from the GridPP package, it needs to be present in the UI: git clone https://github.com/ic-hep/GridPPDIRAC.git and then edit etc/dirac.cfg and add ExtraModules = GridPP

[diracdev.grid.hep.ph.ic.ac.uk]> install agent Configuration UsersAndGroupsAgent

Ports

Enabling Unit Tests

Needs: travis.yml, pytest.ini, requirements.txt and files ending in _test e.g. HelloWorldAgent_test.py

GridPPDIRAC on travis (use GitHub to log in).

The Transformation System (automated file processing)

Transformation System

VMDIRAC (Cloud)

This is obsolete from v8.1 onwards.

VMDIRAC

WebApp

WebApp

Dirac: Back to the dirac overview page.